Custom Cabinetry Features

Solid hardwood door frames and face frames with hardwood or engineered center panels
3/4" prefinished plywood construction cabinet boxes including sides, tops, shelves, and bottoms
M. L. Campbell or Sherwin-Williams catalyzed lacquer finishes. Our finish is resistant to household chemicals, water, food stains, and mild acids.
Standard features:
- Roller bearing side mount drawer glides
- Soft close Salice door hinges
- 1/2" Baltic birch drawer boxes
Available upgrades:
- Soft close full-extension undermount Salice drawer glides
- 3/4" hardwood dovetail drawer boxes

Semi-Custom Cabinetry Features

Solid hardwood door frames and face frames with hardwood or engineered center panels.
White Shaker, Aspen White, Heritage White and Platinum Shaker are composed of solid HDF to ensure the highest quality painted shaker style doors.
Cabinet boxes are 1/2” plywood construction including sides, tops, and bottoms for lasting durability and strength.
Most cabinet box exteriors are match stained and finished inside and out.
3/4” plywood shelves are standard in all cabinets.
Soft Close full extension under mount drawer glides are standard on all lines except Heritage White and Legacy Oak (which feature 120 lb roller bearing side mount drawer glides) and Espresso Shaker (which features side mount white epoxy drawer glides).
Soft close door hinges are standard on York Coffee, Bristol Chocolate, York Cherry, Aspen White, West Point Grey, White Shaker, Platinum Shaker and Hickory Shaker.
York Coffee, Bristol Chocolate, York Cherry, Aspen White, West Point Grey, White Shaker, Platinum Shaker and Hickory Shaker are full overlay cabinet lines.
Butt-style doors eliminate the center stile between the doors and allow for easier use of the cabinet.
Stainless steel baskets are standard in all lazy susan cabinets.
3/4” Hardwood Dovetail Drawer Boxes standard on all except the Espresso Shaker.

Maufactered Cabinetry Features (from the WOLF Classic series)

Base Cabinets

Cabinet fronts are made from 3/4" solid maple wood. Rails are pocket drilled and assembled with 1-1/4" screws for rugged durability.
Side panels and bottom – 1/2" plywood with matching exterior laminate – glued and stapled in a 1/2" dado in the cabinet’s front frame.
Back panels – made from vinyl-covered (inside only) 1/2" plywood – are glued and nailed in a 1/2" dado and stapled to the hang rail and cabinet bottom.
All-wood 3/4" corner blocks are installed on all corners
Half-depth adjustable shelf of 3/4" plywood with bull-nosed, foil-covered front edges.The shelves are held in place with self-locking 1/4" diameter clips on the sides. Toekick - 4-1/2" high x 4-1/16" deep on standard cabinets.

Finish, Drawers, & Hinges

Clear finishes use a catalyzed varnish, and paint finishes use a post-catalyzed lacquer. Our finish is resistant to household chemicals, water, food stains and mild acids.
All drawers are constructed using 5/8" clear finished solid wood with dovetail construction. Drawer bottom is 1/4" plywood in a dado into drawer sides. All drawers (including Pull-Outs) are rated for 75 lbs. Saginaw: Side-mount, standard epoxy GRASS glides Dartmouth, Hudson & York: Full-extension, undermount GRASS glides with soft-close
Saginaw: Hidden, six-way adjustable GRASS hinge Dartmouth, Hudson & York: Hidden, six-way adjustable GRASS hinge with integrated softclose
All cabinets that require handing are handed left (hinge is on the left when looking at the cabinet).Wall cabinets can simply be flipped over to change hinging. For base cabinets, remove and flip door, then screw to other side.
Adjustable 3/4" plywood shelf with bull-nosed, foil-covered front edges.The shelves are held in place with self-locking 1/4" diameter clips on the sides.

Wall Cabinets

Cabinet fronts are made from 3/4" solid wood. Rails are pocket drilled and assembled with 1-1/4" screws for rugged durability.
Side panels and bottom – 1/2" plywood with matching exterior laminate – glued and stapled in a 1/2" dado in the cabinet’s front frame
Back panels – made from vinyl-covered (inside only) 1/2" plywood – are glued and nailed in a 1/2" dado and stapled to the cabinet tops and bottom. Plywood hanging rails are installed at both the top and bottom of the cabinet.
Adjustable 3/4" plywood shelf with bull-nosed, foil-covered front edges.The shelves are held in place with self-locking 1/4" diameter clips on the sides.